|
| |
IP profile editor: RAS settings
Discovery and registration. to a Gatekeeper.
- Discovery method. Discovery method and Gatekeeper lookup table for
the static discovery
mode.
- Auto discovery. The Gatekeeper Request (GRQ) is sent in broadcast mode
- Static discovery. The Gatekeeper Request (GRQ) is sent consecutively to the addresses
in the Gatekeeper look-up table.
- No discovery. Discovery is by-passed and the Registration Request (RRQ) is sent
directly.
- Gatekeeper lookup table
- IP address : port. Input box for the Gatekeeper lookup table.
IP address and UDP port number must be separated by a ':'.
- Add. To add to the Gatekeeper lookup table a couple (IP address, UDP port
number) from the input box.
- Address list. List of couples (IP address, UDP port number) which are
used in sequence to reach a Gatekeeper.
- Remove. To remove the highlighted couple (IP address, UDP port
number) from the table.
Local RAS port. Local UDP port number.
Encode RAS messages. To edit/encode the content of the different outgoing
RAS message types
generated by the emulator during H323 simulation, independently of the outgoing/incoming calls.
RAS
retransmission parameters. List of retransmission parameter values for the output
RAS message types.
- Timer. Without any answer after this delay, the relevant RAS
message type is transmitted again.
- Retry counter. Max number of times the relevant RAS message type is
transmitted again if necessary.
|
